RaspimaticONTuxradio RASPIMATICONTUXRADIO

Eingestellt / EOL

TuxRadio V4 contains a CUL already (/dev/ttyACM0). Put a PIMHMUART into the Pigator slot (/dev/ttyACM1).

How to use TuxRadio V4 as RaspiMatic device

TuxRadio V4 contains a CUL already (/dev/ttyACM0). Put a PIM_HM_UART into the Pigator slot (/dev/ttyACM1).

SD-Card

Follow the instructions from here.

Reboot an browse to: http://tuxradio.ip.address/

Modify configuration

mount -o remount,rw /dev/root /

define at top of /etc/init.d/S00eQ3SystemStart:

UART_DEV=“/dev/ttyACM1”

vi /etc/config/rfd.conf:

[Interface 0] Type = CCU2 ComPortFile = /dev/ttyACM1 AccessFile = /dev/null ResetFile = /dev/null

… and reboot

Install CuxD for Raspimatic

It will automatically recognize CUL on ttyACM0 - Tuxradio is already equipped with culfw.

Do not try to upload firmware to TuxRadios CUL! There is no valid firmware inside cuxd-archive.